Plate Heat Exchanger Plate Dimensions
The rigidity of the plate refers to the ability of the plate to resist the deformation caused by the medium different pressures on both sides under the clamping action of the fixed compression plate and the movable compression plate after the plate is assembled as required.At present, the plate types of heat exchanger plates vary widely, and there are hundreds of forms in turns of its length width ratio of 1:2, 1:3 etc. There are also 1:1, 1:4, 1:5, 1:6 under special working conditions. Different working conditions use different aspect ratios, and their pressure bearing capacity is not the same. After years of development and reach of the plate type, It has found that the aspect ratio of the plate is one of the important factors affecting the stiffness of the plate.