Heat Exchanger Plate Calculations
The clamping size p problem of the plate heat exchanger is generally caused by the leakage of the phe or the inefficiency of the heat exchanger. Due to the lack of professional maintenance knowledge of the phe for the customer, the measurement was not carried out during the disassembly, resulting in the problem of forgetting the size and leaking.You can use the following step to fnd the tightening size.(1)The thickness of the plate. Generally, the thickness of the heat exchanger sheet is divided into 0.5mm-0.8mm, which is usually calculated by taking 0.5mm. (2.)The groove depth of the plate. The groove depth of each model is different. It is generally divided into deep grooves and shallow grooves, so it is necessary to find out which one is.(3) The number of plates. This can be calculated based on the number of plates in the field or based on the heat exchange area.