Heat Exchanger Plate Rubber Gasket
The plate heat exchanger is a new type of high efficiency heat exchanger which is assembled by a series of metal sheets with a certain corrugated shape. PHE gaskets are a key component of plate heat exchangers. The working temperature of the plate heat exchanger is essentially the temperature that the gasket can withstand, and the working pressure of the plate heat exchanger is also restricted by the gasket.Bonded sealtypeis to apply the sealant to the gasket and then directly bond it to the mounting groove of the heat exchanger plate.. The vapor stream should be used to thoroughly remove the adhesive remaining on the bonding surface and the residual gasket before bonding. For blended sealant bonding, the residual adhesive and residual gasket on the bond surface of the plate heat exchanger must be burned out. When bonding in large quantities plates, the liquid nitrogen tank of the refrigerated seal should be prepared and prepared for the drying of the plate heat exchanger with the gasket. The heating temperature should be 160°C.